HESLY Butterfly Razor Wire --- Maximum Security Barrier Applications
The Butterfly Model Razor barbed tape obstacle is recommended and specified around the world as a premier physical perimeter barrier that offers unequaled physical protection and psychological deterrence.
Single coil wire reinforced concertinas are fabricated from 0.6mm (0.025” )thick AISI 304/430 (SS) stainless steel or ASTM A653 (GA) galvanized steel. Each roll consists of 31 coil loops with pairs of loops alternately clipped together. Clusters of eight needle sharp barbs are located 4” o.c. along the spiral turns. Concertina rolls are available in combinations of SS or GA, tape and core wire.
Tape Material: 430 Stainless Steel | 1″ wide prior to forming
Core Material: Galvanized or Stainless Steel | .098″ diameter
Barb Length/Spacing/Offset: 2.5″ (+/-.10″) tip/tip | 4″ on center
USES: Confinement applications, nuclear generating plants, petroleum/chemical storage, refiners, sensitive areas at airports and nuclear weapons storage, etc
SPECIFICATIONS SHEET OF RAZOR WIRE COIL |
||||
OUTSIDE DIA. |
No.s OF LOOPS |
STANDARD LENGTH PER COIL |
MODEL |
NOTE |
450mm |
33 |
8 m |
CBT-65 |
Single Coil |
500mm |
41 |
10 m |
CBT-65 |
Single Coil |
700mm |
41 |
10 m |
CBT-65 |
Single Coil |
960mm |
53 |
13 m |
CBT-65 |
Single Coil |
500mm |
102 |
16 m |
BTO-10/15/22 |
Cross Coil |
600mm |
86 |
14 m |
BTO-10/15/22 |
Cross Coil |
700mm |
72 |
12 m |
BTO-10/15/22 |
Cross Coil |
800mm |
64 |
10 m |
BTO-10/15/22 |
Cross Coil |
960mm |
52 |
9 m |
BTO-10/15/22 |
Cross Coil |
REMARK: other specifications can be made according to requirement. |
BLADE NORMAL SPECIFICATIONS |
||||||
MODEL |
BLADE ILLUSTRATION |
CORE WIRE |
BLADE THK |
BLADE LENGTH |
BLADE WIDTH |
BLADE SPACING |
BTO-12 |
|
2.5±0.1mm |
0.5±0.05mm |
12±1mm |
15±1mm |
26±1mm |
BTO-15 |
![]() |
2.5±0.1mm |
0.5±0.05mm |
15±1mm |
15±1mm |
33±1mm |
BTO-18 |
![]() |
2.5±0.1mm |
0.5±0.05mm |
18±1mm |
15±1mm |
33±1mm |
BTO-22 |
![]() |
2.5±0.1mm |
0.5±0.05mm |
22±1mm |
15±1mm |
34±1mm |
BTO-28 |
![]() |
2.5±0.1mm |
0.5±0.05mm |
28±1mm |
15±1mm |
34±1mm |
BTO-30 |
![]() |
2.5±0.1mm |
0.5±0.05mm |
30±1mm |
18±1mm |
45±1mm |
CBT-60 |
![]() |
2.5±0.1mm |
0.6±0.05mm |
60±2mm |
32±1mm |
96±1mm |
CBT-65 |
![]() |
2.5±0.1mm |
0.6±0.05mm |
65±2mm |
21±1mm |
100±1mm |